Google Translate

Categories

FPV Robocat 270mm Carbon Fiber QuadCopter 5.8G LCD Monitor Cam T6 transmitter

FPV Robocat 270mm Carbon Fiber QuadCopter 5.8G LCD Monitor Cam T6 transmitter

Product Code: 6674
Reward Points: 0
Availability: In Stock
Price: £203.24

Robocat 270mm 4-Axis Carbon Fiber Mini Quadcopter
Specification:
- Wheelbase: 270mm
- Material: 100% Carbon fiber
- Removable hood make from shock-absorbing PC materials
- Flying weight: 410~430 (Battery excluded)
- Model net weight: 190g
- Hood color: Orange/Black/Pink/Yellow (optional. default black)
- 1.5mm thick fuselage & 3mm thick arms
- No assembled,just kit


Flysky FS-T6-RB6 2.4GHz Specifications:
- Channels: 6 Channels
- Type: Mode 2
- RF Range: 2.40-2.48GHz
- Bandwidth: 500Hz
- Band: 160
- RF Power: Less Than 20dBm
- 2.4GHz System: AFHDS
- Code Type: GFSK
- Sensitivity: 1024
- Low Voltage Warning: 9V
- DSC Port: PS2; Output: PPM
- Charger Port: Yes
- Power: 12V DC (1.5AA*8)
- Weight: 590g
- ANT Length: 26mm
- Size: 302x190x93mm
- Certificate: CE, FCC

Required to Operate:
- 8 AA Batteries for Transmitter


EMAX MT1806 2280kv Brushless Motor
Specification:
- KV: 2280
- Max Trust: 460g
- No. of cell: 2-3S
- Framework: 12N14P
- Propeller: 5" ~ 6"
- Length: 26.7mm
- Shaft: 2mm
- Diameter: 23mm
- Weight: 18g

 

SimonK 12A Brushless ESC Speed Controller
Features:
- Based on Simon K firmware, further optimized to the perfect drive performance.
- Low-voltage protection, over-heat protection and self-check functions.
- Separate power supply for MCU and BEC, enhancing the ESC’s ability of eliminating magnetic interference.
- Parameters of the ESC can be set via program card or transmitter.
- Throttle range can be set to be compatible with different receivers.
- Equipped with built-in linear BEC or switch BEC.
- Max speed: 210,000 rpm for 2-pole, 70,000 rpm for 6-pole, 35,000 rpm for 12-pole.

 

Specifications:
- Continuous Current: 12A
- Burst current (10S): 16A
- Li-xx Battery (cell): 2-4Cell
- Dimension (L*W*H): 21mm x 22mm x 4mm
- Weight wires Included: 12g
- BEC Mode: Linear
- BEC Output: 1A/5V
- Programmable: Yes

 
CC3D Flight Controller Introduction:
OpenPilot is a next-generation Open Source UAV autopilot. It is a highly capable platform for multi-rotor craft, helicopters, as well as fixed wing aircraft. It has been designed from the ground up by a community of passionate developers from around the globe, with its core design principals being quality, safety, and ease of use. Simplicity does not come with any compromises either: with no hard-coded settings, a complete flight plan scripting language and other powerful features, OpenPilot is an extremely capable UAV autopilot platform.


FPV TS5823 5.8G 200MW 32CH Transmitter Specification:
- Transmitter unit weight: 7.3g (excluding antenna)
- Video format supported: NTSC / PAL
- Working frequency: 5645-5945Mhz
- Power input: 7-24V
- Transmitting current: 190mA @ 12V
- Video bandwidth: 8M
- Audio coding: 6.5M
- Dimension: 30 * 20 * 8mm (excluding antenna)
- Antenna connection: RP-SMA jack (TX module side)
- Frequency range


FPV RC832 5.8G Receiver Specification:
- Video format supported: NTSC/PAL
- Antenna connection: RP-SMA, jack (module side)
- Sensitivity:≤-90dBm
- Power input: 12V
- Working current: 200mA max
- Antenna impedance: 50ω
- Antenna gain: 2db
- Video impedance: 75ω
- Video format: NTSC/PAL auto
- Dimension: 80x 65 x15mm
- Weight: 85g

 

5.8G Clover-Leaf Circular Polarized Antenna Specifications:
- Gain: 5dBi
- Antenna connector: SMA plug (the connector on the antenna side is referred to, please disregard the label on the antenna if there is discrepancy)
- Standing wave ratio(SWR): <1.5
- Length: 8cm (TX)/10cm(RX)
- Weight: 12.5g(TX)/14g(RX)


700TVL Mini CMOS Camera Specifications:
-  Sensor: 1/4 V8240+FH8510     CMOS
-  System/Effective pixel: PAL ( H X V ):512 X 582
-  Illumination: 0.2 LUX / F1.2
-  Resolution: 700TVL
-  Scanning Frequency: 50Hz~60Hz
-  Gama:0.45
-  Electronic Shutter:1/50~1/100000s   1/60~1/100000s
-  S/N:>46dB
-  Video Output:1.0V p-p
-  Operation Humidity:-20 º C to 50 º C
-  Working Humidity:Relative humidity less than 95%
-  Power consumption:DC12V

 

7 inch HD LCD TFT Screen Monitor Specifications:
- Screen size: 7" inch
- Display format: 16:9
- System: PAL/ NTSC (Auto switch)
- Resolution: 800 x 480
- Brightness: 350cd/m2
- Contrast: 350:1
- Red line: Power Input
- Yellow and White line: vedio input
- Housing Material: ABS
- Low power consumption
- Power Supply: DC 12V
- Operating Temperature 0°C ~+ 80°C
- Storage Temperature -10°C + 80°C
- Dimensions: 174 x 113 x 19 mm


Package:
- Mini 250 FPV Quadcopter Frame x1
- ESC Connection Board x1
- EMAX 1806 2280kv Brushless Motor x4
- 12A Simonk ESC x4
- 5030 Propeller CW&CCW x4
- 700TVL Mini Camera x1
- CC3D Openpilot Open Source Flight Controller
- 5.8ghz Antenna(TX & RX) x1
- TS5823 5.8G 200MW 32CH Transmitter x1
- FPV RC832 5.8G Receiver x1
- 7 inch HD LCD TFT Screen Monitor x1
- Flysky FS-T6-RB6 2.4GHz Transmitter & Receiver x1

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: