Google Translate


Robocat 270mm Carbon Fiber Copter FPV AV 7" LCD Monitor Cam Emax motor ESC CC3D

Robocat 270mm Carbon Fiber Copter FPV AV 7" LCD Monitor Cam Emax motor ESC CC3D

Product Code: 6673
Reward Points: 0
Availability: In Stock
Price: £155.46

Robocat 270mm 4-Axis Carbon Fiber Mini Quadcopter
- Wheelbase: 270mm
- Material: 100% Carbon fiber
- Removable hood make from shock-absorbing PC materials
- Flying weight: 410~430 (Battery excluded)
- Model net weight: 190g
- Hood color: Orange/Black/Pink/Yellow (optional. default black)
- 1.5mm thick fuselage & 3mm thick arms
- No assembled,just kit

EMAX MT1806 2280kv Brushless Motor
 - KV: 2280
- Max Trust: 460g
- No. of cell: 2-3S
- Framework: 12N14P
- Propeller: 5" ~ 6"
- Length: 26.7mm
- Shaft: 2mm
- Diameter: 23mm
- Weight: 18g

Emax SimonK 12A Brushless ESC Speed Controller:
- Based on Simon K firmware, further optimized to the perfect drive performance.
- Low-voltage protection, over-heat protection and self-check functions.
- Separate power supply for MCU and BEC, enhancing the ESC’s ability of eliminating magnetic interference.
- Parameters of the ESC can be set via program card or transmitter.
- Throttle range can be set to be compatible with different receivers.
- Equipped with built-in linear BEC or switch BEC.
- Max speed: 210,000 rpm for 2-pole, 70,000 rpm for 6-pole, 35,000 rpm for 12-pole.

- Continuous Current: 12A
- Burst current (10S): 15A
- Li-xx Battery (cell): 2-3
- Dimension (L*W*H): 25mm x 20mm x 7mm
- Weight wires Included: 9
- BEC Mode: Linear
- BEC Output: 1A/5V
- Programmable: Yes  

CC3D Flight Controller Introduction:
OpenPilot is a next-generation Open Source UAV autopilot. It is a highly capable platform for multi-rotor craft, helicopters, as well as fixed wing aircraft. It has been designed from the ground up by a community of passionate developers from around the globe, with its core design principals being quality, safety, and ease of use. Simplicity does not come with any compromises either: with no hard-coded settings, a complete flight plan scripting language and other powerful features, OpenPilot is an extremely capable UAV autopilot platform.

FPV TS5823 5.8G 200MW 32CH Transmitter Specification:
- Transmitter unit weight: 7.3g (excluding antenna)
- Video format supported: NTSC / PAL
- Working frequency: 5645-5945Mhz
- Power input: 7-24V
- Transmitting current: 190mA @ 12V
- Video bandwidth: 8M
- Audio coding: 6.5M
- Dimension: 30 * 20 * 8mm (excluding antenna)
- Antenna connection: RP-SMA jack (TX module side)
- Frequency range

FPV RC832 5.8G Receiver Specification:
- Video format supported: NTSC/PAL
- Antenna connection: RP-SMA, jack (module side)
- Sensitivity:≤-90dBm
- Power input: 12V
- Working current: 200mA max
- Antenna impedance: 50ω
- Antenna gain: 2db
- Video impedance: 75ω
- Video format: NTSC/PAL auto
- Dimension: 80x 65 x15mm
- Weight: 85g

5.8G Clover-Leaf Circular Polarized Antenna Specifications:
- Gain: 5dBi
- Antenna connector: SMA plug (the connector on the antenna side is referred to, please disregard the label on the antenna if there is discrepancy)
- Standing wave ratio(SWR): <1.5
- Length: 8cm (TX)/10cm(RX)
- Weight: 12.5g(TX)/14g(RX)

700TVL Mini CMOS Camera Specifications:
-  Sensor: 1/4 V8240+FH8510     CMOS
-  System/Effective pixel: PAL ( H X V ):512 X 582
-  Illumination: 0.2 LUX / F1.2
-  Resolution: 700TVL
-  Scanning Frequency: 50Hz~60Hz
-  Gama:0.45
-  Electronic Shutter:1/50~1/100000s   1/60~1/100000s
-  S/N:>46dB
-  Video Output:1.0V p-p
-  Operation Humidity:-20 º C to 50 º C
-  Working Humidity:Relative humidity less than 95%
-  Power consumption:DC12V

7 inch HD LCD TFT Screen Monitor Specifications:
- Screen size: 7" inch
- Display format: 16:9
- System: PAL/ NTSC (Auto switch)
- Resolution: 800 x 480
- Brightness: 350cd/m2
- Contrast: 350:1
- Red line: Power Input
- Yellow and White line: vedio input
- Housing Material: ABS
- Low power consumption
- Power Supply: DC 12V
- Operating Temperature 0°C ~+ 80°C
- Storage Temperature -10°C + 80°C
- Dimensions: 174 x 113 x 19 mm

- Robocat 270mm 4-Axis Carbon Fiber Frame x1
- ESC Connection Board x1
- EMAX 12A SimonK ESC X4
- EMAX MT1806 2280kv Brushless Motor x4
- 5030 Propeller CW&CCW x4
- 700TVL Mini Camera x1
- CC3D Openpilot Open Source Flight Controller X1
- 5.8ghz Antenna(TX & RX) x1
- TS5823 5.8G 200MW 32CH Transmitter x1
- FPV RC832 5.8G Receiver x1
- 7 inch HD LCD TFT Screen Monitor x1

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: